If you have a Shark robot vacuum, you may be wondering what the dust cup is for. The dust cup is actually a very important part of the vacuum. It helps to keep the vacuum clean and free from dirt and debris.
Without the dust cup, your Shark robot vacuum would not be able to function properly.
The dust cup on Shark robot vacuum is a small, detachable cup that collects dust and debris from your floors as the vacuum cleaner moves around. The cup has a capacity of about 0.5 liters and can be emptied easily when full.
Shark ION ROBOT™ – How do I maintain the dust cup and filter?
What is the Dust Cup on Shark Vacuum?
The dust cup on Shark vacuums is a detachable canister that collects debris and dust as you vacuum. It’s easy to empty and can be rinsed out with water for thorough cleaning. The capacity of the dust cup varies by model, but most have a capacity of around 0.5 quarts.
Where is the Dust Cup on My Shark Robot Vacuum?
The dust cup on the Shark Robot Vacuum is located on the bottom of the unit. To access it, you need to remove the bottom plate by pressing the release button and then pulling it off. The dust cup is attached to the motor housing and can be easily removed for emptying and cleaning.
How Do You Empty the Shark Iq Dust Cup?
Assuming you are referring to the Shark IQ Robot Vacuum, here are instructions on how to empty the dust cup:
1. Lift the dust cup release latch and pull the dust cup out.
2. Dump the contents of the dust cup into a garbage bin.
3. Rinse the dust cup with water and dry thoroughly before replacing.
What is a Vacuum Dust Cup?
A vacuum dust cup is a small, cylindrical container that attaches to the end of a vacuum cleaner hose. It is used to collect dust and debris from surfaces being cleaned. The cup has a lid that seals tightly, preventing the contents from spilling out when the vacuum is turned off.
Credit: www.trustedreviews.com
How to Empty Shark Robot Dust Cup
Is your Shark Robot acting up and not suctioning like it used to? Chances are, the dust cup is full and needs to be emptied. Here’s a step-by-step guide on how to do just that:
1. Unplug your Shark Robot from the power source.
2. Remove the dust cup by pressing the release button and lifting it off of the base.
3. Dump out all of the dirt and debris into the trash can.
4. Rinse off the dust cup with water to remove any lingering dirt or debris.
5. Allow the dust cup to dry completely before reattaching it to the base and plugging in your Shark Robot.
Conclusion
The dust cup on Shark robot vacuum is a small, detachable container that collects dust and debris while the vacuum is in use. This cup must be emptied after each use to maintain optimal performance.