Av751 Shark Factory Reset

Av751 Shark Factory Reset

Do you want to know how to factory reset Av751 Shark robotic vacuum cleaner? The process of resetting your Av751 Shark device can vary depending on the model, but there are a few basic steps that are always required.

If you’re having trouble with your Av751 Shark and want to start fresh, here’s how to do it.

First, you’ll need to locate the reset button. This is usually found on the back or bottom of the device.
Once you’ve found the reset button, press and hold it for a few seconds until you hear a beep or see a light indicate that the reset is complete.

Depending on your model, you may also need to enter a code or confirm the reset by pressing another button.

Follow any prompts that appear on-screen and then restart your device. Your Av751 Shark should now be factory reset!

If you’ve forgotten your Shark vacuum’s password, or if you want to reset it for any other reason, here’s how to do a factory reset. First, unplug the vacuum from the power outlet. Then, press and hold the Power button for 10 seconds.

This will trigger a factory reset and all of your settings will be erased.

How to reset older model shark ion robot vacuum cleaner memory

How Do I Perform a Factory Reset on My Av751 Shark

If your Av751 Shark is having problems and you want to try resetting it to factory default settings, here’s how:

Factory Reset on My Av751 Shark
  • 1. On the back of your Av751 Shark, find the RESET button. It should be small and recessed, so you’ll need a paperclip or other sharp object to press it.
  • 2. Press and hold the RESET button for about 10 seconds. All the lights on your Av751 Shark will flash briefly, then it will reboot itself.
  • 3. Once it has rebooted, all your settings will have been reset to factory defaults.

    You can now set up your Av751 Shark again from scratch.


If your Avaya 751 Shark cordless vacuum cleaner isn’t working properly, you may need to reset it.

To do this, simply press and hold the “Menu” button for about five seconds.

The display will then show “Factory Reset.” Press the “OK” button to confirm and restart your phone.